# Vehicle diagnostic report service

Learn what a vehicle diagnostic report service does, how an OBD-II scan reads fault codes, and what a diagnostic report can and cannot tell you about a car.

A vehicle diagnostic report service reads the fault codes stored by a car's computer and turns them into a written diagnostic report you can understand. The service connects an OBD-II scan tool to the diagnostic port and pulls codes from the engine control module and other modules. You get a document that names the fault codes, the systems involved and the checks a technician recommends next. It supports a buying decision or a repair conversation but does not replace a hands-on inspection. 

## How the scan is performed 

A vehicle diagnostic report service starts with an OBD-II scan through the port under the dashboard. The tool requests stored and pending fault codes from the engine control module and other control units. A pending code means a fault was detected once, while a stored code means the fault repeated. The technician records the codes and the freeze-frame data captured when the fault set. 

## What the report contains 

A diagnostic report lists each fault code with a plain-language description of the circuit or system it covers. It groups codes by system, such as engine management, transmission or emissions controls. The report explains which checks a technician should run before any part is replaced. It is a record of findings, not a repair estimate. 

## Where a scan stops short 

A diagnostic scan shows where the computer sees a fault, not which component has failed. A code for a lean fuel mixture can point to a vacuum leak, a weak pump or a sensor. The check engine light may stay off even when a fault is stored as pending. A physical inspection and live data checks are needed to confirm the cause before parts are fitted. 

## Questions about diagnostic reports 

### Does a diagnostic report tell me what is wrong with the car? 

A vehicle diagnostic report tells you which fault codes the computer has stored and which systems they concern. It does not confirm the failed part, because one code can have several causes. A technician uses the report as a starting point for testing. The report alone should not be treated as a repair diagnosis. 

### Can a diagnostic scan clear the check engine light? 

A diagnostic scan can clear fault codes and switch off the check engine light, but the light returns if the fault is still present. Clearing codes also erases the stored data a technician needs to trace the problem. Clear codes only after the cause is found and repaired. Otherwise you lose useful evidence and may hide a real fault. 

### Do I need a diagnostic report before buying a used car? 

A diagnostic report adds useful evidence to a used car check because it shows stored faults the seller may not mention. It works alongside a physical inspection rather than replacing it. Ask for the report to include pending codes and freeze-frame data. A car with no stored codes can still have mechanical faults the computer does not monitor. 

### What is the difference between a scan and a full diagnostic? 

A diagnostic scan reads fault codes from the engine control module and other units in a short session. A full diagnostic adds live sensor data, circuit tests and a road test to trace the cause of each code. The scan is the first step and the full diagnostic is the investigative work. A report service may offer either, so check what the service includes.
