# Type 3 and type 6 engine identification

Learn what type 3 and type 6 fire engines are, how their engine classification differs, and how to identify each type in a listing before you shortlist.

Type 3 and type 6 engine identification sorts wildland fire engines by what they can carry and pump. A type 3 engine is a heavier wildland unit with a larger water tank and stronger pump. A type 6 engine is a light unit on a small truck chassis, built for speed and access. Below you will find how the classes work and how to match a listed truck to its type. 

## How engine type codes are assigned 

Engine type codes in firefighting describe a truck by minimum capability, not by brand or model. Each type sets floors for tank capacity, pump flow, hose load and crew size. Types 1 and 2 cover structural engines, while types 3 through 7 cover wildland engines. Exact minimums depend on the agency and the edition of the typing standard it follows. 

## Where type 3 and type 6 engines differ 

Type 3 and type 6 engines differ mainly in size, water capacity and pumping power. A type 3 engine rides on a heavier chassis with room for a larger crew and tank. A type 6 engine uses a light truck chassis, which lets it reach narrow or rough ground. Both types are expected to pump while moving, a technique called pump-and-roll. 

## Identifying the engine type in a listing 

Identifying a fire engine's type from a listing means checking its specs against the typing minimums. Look for the pump rating plate, the tank capacity, the chassis weight rating and the seating. A seller's engine designation is only a claim until a build sheet or pump test record confirms it. Keeping these figures side by side makes two used engines easier to compare fairly. 

## Questions about wildland fire engine types 

### What is a type 3 engine? 

A type 3 engine is a wildland fire engine built for heavy off-road work with a sizable water supply. Compared with the lighter wildland types, it carries more water and a stronger pump. Crews use it for initial attack, meaning the first response to a fire, and for extended operations. 

### What is a type 6 engine? 

A type 6 engine is a light wildland fire engine built on a small truck chassis. Its smaller tank and pump trade capacity for speed, agility and access to tight terrain. Agencies use it for initial attack, patrol and mop-up, the work of cooling remaining hot spots. 

### Is a type 3 engine the same as the Volkswagen Type 3 engine? 

No, a wildland type 3 engine is unrelated to the Volkswagen Type 3 car engine. The Volkswagen Type 3 was a car line that used an air-cooled flat-four engine. Its low fan layout earned it the nicknames 'pancake' or 'suitcase' engine. Check the context of a listing to see which meaning the seller intends. 

### Can a fire engine change from one type to another? 

Yes, a fire engine's type can change when its equipment or capability changes. Adding a larger tank, a stronger pump or more crew seats may move it to a heavier type. Any modification to tank, pump or chassis loading calls for a qualified apparatus specialist. Retyping also depends on the agency's inspection and the standard it applies.
