# Track fuel economy tank to tank at home

Learn the tank-to-tank method for measuring real fuel use, from a full tank refill and odometer reading to MPG and liters per 100 km.

To track fuel economy tank to tank at home, fill up completely and record the odometer reading. At the next fill, divide the distance driven by the fuel the pump puts back in. The result reflects your own roads, loads and habits rather than a lab figure. This page covers the calculation, the logbook and the habits that keep readings consistent. 

## The calculation from two full fills 

The tank-to-tank fuel economy calculation uses the distance between two full fills and the fuel added. For miles per gallon, or MPG, divide the miles driven by the gallons added at the second fill. For liters per 100 km, divide the liters added by the kilometers driven, then multiply by 100. A lower liters per 100 km figure and a higher MPG figure both mean better economy. 

## Keeping a fuel log spreadsheet 

A fuel log spreadsheet is a simple way to log fuel consumption at home after each fill. Give each row the date, odometer reading, fuel added and whether the tank was filled. A formula column can subtract the previous odometer value to get the trip distance. Photos of the pump display and odometer help you correct entries typed in later. 

## Averaging readings over several tanks 

Consumption averaging over several tanks gives a steadier fuel economy figure than any single fill. Pumps shut off at slightly different levels, so one tank can read high or low. For a correct average, combine total distance and total fuel rather than averaging each tank's result. Using the same pump and filling to the first automatic click keeps readings more comparable. 

## Questions about tank-to-tank fuel tracking 

### What if I don't fill the tank all the way? 

A partial fill breaks the tank-to-tank method because the fuel added no longer matches the fuel used. Record the partial fill anyway, including its liters or gallons and the odometer reading. At the next full tank refill, add every partial amount to that fill's fuel figure. Measure the distance from the last full fill so the totals cover the same stretch. 

### Can I use the trip meter instead of the odometer? 

Yes, the trip meter works for tank-to-tank tracking if you reset it at each full fill. A forgotten reset loses the distance, while the main odometer reading always keeps counting. Writing down the odometer value as well gives you a backup for any missed reset. 

### Why does my calculated MPG differ from the dashboard display? 

The dashboard fuel economy display is an estimate from sensors, while the tank-to-tank figure uses fuel actually pumped. The size and direction of the gap vary from one vehicle to another. Odometer error and tire size also affect both numbers, since distance comes from wheel rotation. 

### How do I convert MPG to liters per 100 km? 

To convert US [MPG to liters per 100 km](/articles/how-to-convert-mpg-to-litres-per-100-km/), divide about 235.2 by the MPG figure. For imperial MPG, which uses a larger gallon, divide about 282.5 by the MPG figure. The same division works in reverse, turning liters per 100 km back into MPG.
