Tare weight of caravans and motorhomes: what is included

Learn what the tare weight of a caravan or motorhome covers, from empty tanks to fitted equipment, and how it differs from payload and gross mass.

7 min read3 viewsTare weight of caravans and motorhomes: what is included
— · 0 votes
Contents
  1. What tare weight means on a listing
  2. Fixtures and fittings count in the tare figure
  3. Water tanks and gas bottles in the empty state
  4. Tare, gross technical mass and payload together
  5. Why the same model can show different figures
  6. Checking a tare figure before you commit
  7. Questions About Caravan and Motorhome Tare Weight
  8. What is included in the tare weight of a caravan?
  9. What is included in the tare weight of a motorhome?
  10. Do gas bottles count in the tare weight?
  11. Are water tanks part of the empty weight?
  12. How do I get the payload from the tare weight?

The tare weight of a caravan or motorhome is the mass of the vehicle as it leaves the factory, ready to drive but empty of users, personal cargo and operating fluids. It includes the body, the fitted fixtures and fittings, and the standard equipment the maker declares. It excludes water in the tanks, gas in the bottles and everything you load for a trip.

  • The tare weight counts the built vehicle and its factory-fitted equipment, not your luggage or supplies.
  • Water tanks count as empty, and gas bottles count without their gas content.
  • Fixtures and fittings such as the cooker, fridge and bed frames sit inside the tare figure.
  • The gross technical mass is the upper limit, and the payload is the room left for people, water, gas and cargo.
  • Listings use different names for these masses, so compare the declared basis before you trust the numbers.

What tare weight means on a listing

Tare weight is the mass of the finished caravan or motorhome with its standard equipment and no load. The term is also called empty weight or kerb weight, depending on the maker and the document. The figure describes the vehicle itself, so it stays the same whatever you plan to carry.

A listing that quotes tare weight is telling you where the scale starts before loading begins. The number can shift with factory options such as an awning, a bike rack or a second battery. Check whether the quoted figure covers the options fitted to that specific vehicle.

Tare weight is not a limit and it is not a target. Treat the figure as a reference point that lets you work out how much mass remains for your own use. The remaining room is the payload, which the maker states or which you calculate from the gross technical mass.

Fixtures and fittings count in the tare figure

Fixtures and fittings are included in the tare weight of a caravan or motorhome because they are part of the delivered vehicle. The cooker, fridge, heater, bed frames, cabinets, wiring and plumbing all add mass that the maker builds in. Nothing bolted or wired into the vehicle is left out of the declaration.

The same rule covers items fitted at the factory as standard equipment rather than as personal additions. A fitted spare wheel, a habitation door step and a standard leisure battery belong in the empty weight. Dealer-fitted accessories can fall outside the declared figure, so ask which parts the manufacturer counted.

Anything you add after purchase sits outside the tare weight and eats into the payload instead. A rooftop air conditioner, an extra solar panel or a tow bar fitted later adds to the load you carry. Record such additions and subtract them from the payload you thought you had.

Water tanks and gas bottles in the empty state

Water tanks are included as empty containers in the tare weight of a caravan or motorhome. The tank shell and its fittings count because they are fixed to the vehicle. The water itself is excluded, since the vehicle is weighed without a fresh water fill.

Gas bottles follow a similar rule, with the bottles counted and the gas left out. An empty steel or composite bottle has real mass that belongs to the vehicle. The propane or butane inside is treated as part of the load you add later.

Some declarations go further and state a mass in running order that includes a set amount of water or gas. That basis differs from a plain tare figure, so read the label on the vehicle. Compare two listings only when both quote the same basis.

Tare, gross technical mass and payload together

Tare weight, gross technical mass and payload form one linked set of numbers on a caravan or motorhome. The gross technical mass is the maximum the vehicle may weigh when fully loaded. The payload is the difference between that maximum and the tare weight.

Payload covers everything you add, from passengers and clothing to food, tools and a full water tank. Gas, water and any dealer-fitted accessory reduce the room you have left. A generous payload figure gives you more freedom to load without reaching the limit.

The three numbers only work as a set, so a low tare weight alone says little. A light empty vehicle with a low gross technical mass can still offer a small payload. Compare the gross technical mass and the payload alongside the tare figure.

Mass termWhat it countsWhat it leaves out
Tare weightBuilt vehicle with fixtures and standard equipmentWater, gas content, personal cargo
Gross technical massMaximum permitted loaded massNothing, it is a ceiling
PayloadRoom for people, water, gas and cargoNothing, it is the remainder

Why the same model can show different figures

Tare weight varies between vehicles of the same model because fitted options change the mass. An awning, a larger battery bank or a different heating system adds kilograms that the maker must declare. Two vans that look alike can therefore carry different empty weights.

Measuring methods also differ, and a maker may quote a mass in running order instead of a bare tare figure. A running order mass can include a stated quantity of water, gas or fuel. The label on the vehicle or the certificate of conformity gives the basis that applies to that unit.

Weighing tolerance plays a part as well, since production vehicles vary slightly from the calculated figure. Ask for the declared mass of the exact unit rather than the brochure figure for the range. A verified weight from a public weighbridge settles the question for a vehicle you own.

Checking a tare figure before you commit

A careful buyer checks the declared masses on the actual vehicle and keeps a written record. The certificate of conformity, the manufacturer plate and the sales documents should agree on the basis and the numbers. Use one consistent set of figures when you build a shortlist.

Weigh the vehicle if you can, since a weighbridge reading shows what the empty vehicle really weighs with its fitted equipment. Compare that reading with the declared tare figure and note any difference. The gap tells you how much the options have added.

Lay the numbers side by side for each candidate and subtract tare weight from gross technical mass. The result is the payload you can plan around, after allowing for water, gas and passengers. Keep your own notes so different listing formats do not mislead you.

Questions About Caravan and Motorhome Tare Weight

What is included in the tare weight of a caravan?

The tare weight of a caravan includes the body, chassis, fixtures and fittings, and the standard equipment fitted at the factory. It counts water tanks as empty and gas bottles without their gas content. Personal cargo, water and gas are left out.

What is included in the tare weight of a motorhome?

The tare weight of a motorhome includes the base vehicle, the habitation body, the fitted furniture and appliances, and the standard equipment. Engine fluids are counted under the manufacturer's stated basis. Passengers, water, gas and luggage are excluded.

Do gas bottles count in the tare weight?

Empty gas bottles count in the tare weight because they are fixed to the vehicle and supplied with it. The gas inside does not count, since it is treated as part of the load. A full bottle therefore adds to the payload you use.

Are water tanks part of the empty weight?

Water tanks are part of the empty weight as empty containers, together with their pumps and pipework. The water itself is not counted unless the maker quotes a running order mass that includes it. Check which basis the listing uses.

How do I get the payload from the tare weight?

Subtract the tare weight from the gross technical mass, and the result is the payload available for people, water, gas and cargo. Confirm both figures on the vehicle plate or certificate. Use the declared basis that matches the vehicle you are viewing.

Read next

Latest articles