Fuel economy unit conversion chart
Convert fuel economy between miles per gallon, liters per 100 km and km per liter, with a chart and formula, so listings in different units can be compared side by side.
Contents
- Why the two scales move in opposite directions
- How to convert liters per 100 km to MPG
- How to convert MPG to liters per 100 km
- Reading a fuel economy conversion chart
- Miles per gallon versus liters per 100 km in practice
- Worked examples for a shortlist
- Keeping a conversion chart accurate
- Choosing the right converter for your task
- Fuel economy conversion questions
- How do I convert litres per 100km to MPG?
- How do I convert MPG to L/100km?
- Is higher MPG better than a lower L/100 km figure?
- Can I convert fuel consumption to kilometers per liter?
- Why does a fuel economy conversion chart use different constants?
- Does the conversion change when the fuel is diesel?
A fuel economy unit conversion chart lets you read a figure in miles per gallon and see the same consumption in liters per 100 kilometers. The two scales run in opposite directions, so a higher MPG always means a lower L/100 km value. Learn the formula once and any listing becomes comparable.
- Liters per 100 km measures fuel used to travel a fixed distance, while miles per gallon measures distance travelled on a fixed amount of fuel.
- The scales are inverted, so doubling MPG does not halve the L/100 km figure.
- Multiplying L/100 km by 2.352 gives the equivalent in US MPG for gasoline.
- Divide 235.2 by US MPG to get liters per 100 km.
- Imperial gallons are larger than US gallons, so the two MPG figures differ.
- For a cost comparison, convert both listings to the same unit before you multiply by fuel price.
Why the two scales move in opposite directions
Fuel economy units split into two families that read in opposite directions. Miles per gallon and kilometers per liter count how far a vehicle travels on a set amount of fuel. Liters per 100 kilometers counts how much fuel is needed to cover a set distance. Higher numbers are better in one family and worse in the other.
Miles per gallon comes from imperial and metric traditions and survives in places that still sell fuel by the gallon. Liters per 100 kilometers is the metric way to express consumption and spreads with metric fuel sales. The two figures describe the same vehicle, so neither is more accurate than the other.
Mixing the two scales in one comparison misleads you badly. A car at 40 MPG uses about 5.9 L/100 km, while a car at 20 MPG uses about 11.8 L/100 km. The relationship is a reciprocal one, not a straight line, so a chart helps you keep the direction straight.
| US MPG | L/100 km | km/L |
|---|---|---|
| 10 | 23.5 | 4.3 |
| 20 | 11.8 | 8.5 |
| 30 | 7.8 | 12.8 |
| 40 | 5.9 | 17.0 |
| 50 | 4.7 | 21.3 |
How to convert liters per 100 km to MPG
To turn liters per 100 kilometers into US miles per gallon, multiply the L/100 km figure by 2.352. A car listed at 8 L/100 km works out to about 18.8 MPG. The factor 2.352 blends the liters-to-gallons step with the 100-kilometer-to-mile step into one number.
The same L/100 km figure converted to imperial MPG uses a different factor of 2.825. An imperial gallon holds more fuel than a US gallon, so an imperial MPG figure always reads higher than the US figure for the same car. Confirm which gallon a listing uses before you convert.
For kilometers per liter, divide 100 by the L/100 km value. A figure of 8 L/100 km becomes 12.5 km/L. You can then multiply by 2.352 to reach US MPG and check that the two paths agree.
- L/100 km to US MPG: multiply by 2.352
- L/100 km to imperial MPG: multiply by 2.825
- L/100 km to km/L: divide 100 by the figure
- L/100 km to miles per US gallon: check against the chart after calculating
How to convert MPG to liters per 100 km
Converting US miles per gallon to liters per 100 kilometers means dividing 235.2 by the MPG figure. A vehicle rated at 30 MPG comes to about 7.8 L/100 km. The constant 235.2 is the product of the gallon-to-liter factor and the kilometer-to-mile factor.
Imperial MPG uses a divisor of 282.5 instead. The larger imperial gallon moves the constant up, so the same car gives a lower L/100 km figure through the imperial route. Keep the gallon type attached to the number in your notes to avoid a silent error.
For kilometers per liter, multiply the US MPG figure by 0.425. A rating of 30 MPG becomes roughly 12.8 km/L. That value is the mirror of the liters formula and gives a quick cross-check on your arithmetic.
- US MPG to L/100 km: divide 235.2 by the figure
- Imperial MPG to L/100 km: divide 282.5 by the figure
- US MPG to km/L: multiply by 0.425
- MPG to L/100 km: compare with the chart to catch a slip
Reading a fuel economy conversion chart
A fuel economy unit conversion chart lines up the scales in parallel columns so you can read across a row. Look up a value in the column you have and read the matching value in the column you need. The chart removes the arithmetic and keeps the direction of the scales visible.
Charts are built for a whole range, so the steps between rows grow uneven as the figures rise. A change from 10 to 20 MPG moves L/100 km by more than a change from 40 to 50 MPG. Read the chart as a set of landmarks, then calculate when a listing falls between rows.
Charts that mix US and imperial MPG columns cause confusion, so pick the column that matches the listing's fuel and gallon type. Where a chart gives only US figures, the imperial column can be derived with the 2.825 factor. Treat the printed rows as approximations and the formula as the precise step.
| US MPG | Imperial MPG | L/100 km |
|---|---|---|
| 15 | 18.0 | 15.7 |
| 25 | 30.0 | 9.4 |
| 35 | 42.0 | 6.7 |
| 45 | 54.0 | 5.2 |
Miles per gallon versus liters per 100 km in practice
Miles per gallon versus liters per 100 km comes down to the question you are asking. If you want to know how far a tank takes you, the MPG scale answers it directly. If you want to know what a journey will cost in fuel, the L/100 km scale multiplies cleanly by distance and price.
Consumption figures in liters per 100 km translate into cost with one multiplication. Multiply the figure by the distance in kilometers and divide by 100, then multiply by the fuel price per liter. An MPG figure needs a conversion before that step, so a mixed shortlist benefits from a single unit.
Fuel type affects comparability as well, since diesel and gasoline differ in energy content per liter. Ratings also depend on the test cycle used, so a figure from one test standard does not map directly onto another. Compare figures from the same standard where you can, and treat the conversion chart as a unit tool rather than a performance verdict.
- Pick one unit for every listing before you compare
- Note the gallon type next to any MPG figure
- Check that both ratings come from the same test standard
- Convert, then multiply by distance and fuel price for cost
Worked examples for a shortlist
A shortlist comparison runs best when each listing is converted to the unit you think in. Take three cars listed at 45 MPG US, 6.5 L/100 km and 15 km/L. Converting the first gives about 5.2 L/100 km, and the third gives about 6.7 L/100 km. The three figures then sit on one scale.
The example shows how the middle listing, at 6.5 L/100 km, sits between the other two after conversion. Without conversion, the raw numbers rank differently and the MPG figure looks like the largest. A consistent unit prevents a scale error from steering the shortlist.
Cost follows the converted figures. Multiply each L/100 km value by a planned annual distance and by the local fuel price to reach a yearly fuel cost. The same distance and price apply to every listing, so the ranking stays fair. Record the gallon type and the unit on each row of your notes.
Keeping a conversion chart accurate
A conversion chart is only as good as the constants behind it. The US MPG constant of 235.2 assumes US gallons and statute miles, so a chart built on imperial gallons uses 282.5. Label the chart with the gallon type and the distance unit it assumes to stop a reader applying the wrong column.
Rounding is the other source of drift. Two decimal places suit most comparisons, but rounding each step of a multi-step conversion compounds the error. Convert once from the original figure and keep the unrounded value in your notes until the final row.
Recalculate any chart you inherit, because a single mistyped row sends a shortlist the wrong way. Spot-check a few rows against the formula before you rely on the table. A chart is a shortcut for the formula, not a replacement for it.
- Label the gallon type on every chart column
- Confirm the distance unit assumed by the constants
- Convert once from the original figure, not from a rounded one
- Spot-check chart rows against the formula
- Keep the unrounded value until the final comparison
Choosing the right converter for your task
A fuel economy unit converter comes in several forms, and the task decides which one suits you. A printed chart works at a desk with a shortlist on paper. A spreadsheet formula recalculates a whole table when you add a listing. A calculator app handles a single figure quickly.
For a spreadsheet, store the raw figure and the gallon type in separate cells. Build the formula once and copy it down the column so every row follows the same rule. That setup lets you add a listing in any unit without reworking the table by hand.
Whichever tool you use, keep the original figure beside the converted one. The original figure is the evidence, and the converted figure is the comparison view. A shortlist you can trace back to source numbers is one you can defend and adjust.
- Printed chart: fast reading of a fixed range
- Spreadsheet: repeatable conversion for a full shortlist
- Calculator: one figure at a time
- Any tool: keep the original figure next to the converted one
Fuel economy conversion questions
How do I convert litres per 100km to MPG?
Multiply the liters per 100 km figure by 2.352 to get US miles per gallon. An 8 L/100 km rating becomes about 18.8 MPG. Use 2.825 instead when the MPG figure refers to imperial gallons, because the imperial gallon is larger.
How do I convert MPG to L/100km?
Divide 235.2 by the US MPG figure to get liters per 100 kilometers. A rating of 30 MPG works out to about 7.8 L/100 km. For imperial MPG, divide 282.5 by the figure instead, so keep the gallon type with the number.
Is higher MPG better than a lower L/100 km figure?
Yes, higher MPG and lower L/100 km both mean better fuel economy, and the scales run in opposite directions. A rise in MPG always brings a fall in the liters per 100 km figure. Compare the two only after converting them to one unit.
Can I convert fuel consumption to kilometers per liter?
Yes, divide 100 by the liters per 100 km figure to get kilometers per liter. An 8 L/100 km rating becomes 12.5 km/L. You can also multiply a US MPG figure by 0.425 to reach kilometers per liter.
Why does a fuel economy conversion chart use different constants?
A fuel economy conversion chart uses different constants because US and imperial gallons hold different volumes. The US route uses 235.2 and the imperial route uses 282.5. A chart that leaves out the gallon type can send a comparison in the wrong direction.
Does the conversion change when the fuel is diesel?
No, the unit conversion is the same for diesel because it moves between distance and volume units only. Diesel and gasoline do differ in energy content, so an efficiency comparison across fuel types needs more than a unit change. Use the chart for units and judge fuel type separately.