Create a listing comparison template in Word

Build a side-by-side listing comparison template in Word: set up a table, choose comparison criteria, fill listing columns, and keep two lists aligned.

9 min read4 viewsCreate a listing comparison template in Word
— · 0 votes
Contents
  1. Start with a Word table
  2. Choose the comparison criteria first
  3. Set up side-by-side listing columns
  4. Build the header row and labels
  5. Fill each row with one detail
  6. Save the table as a reusable template
  7. Keep the layout readable on screen and paper
  8. Handle larger and uneven listings
  9. Listing comparison questions in Word
  10. How do I make a comparison table in Word?
  11. How do I put two lists side by side in Word?
  12. What should a side-by-side comparison template in Word contain?
  13. How do I add or remove a listing in the template?
  14. Can I reuse the comparison table for other listings?
  15. How do I keep a long comparison table readable across pages?

You create a listing comparison template in Word by inserting a table and turning it into columns you reuse for every listing you compare. The table holds the comparison criteria down the left and one listing per column on the right. Word then keeps the details of your shortlist aligned as you add or remove listings.

  • A Word table is the simplest base for a listing comparison template, because each cell keeps one detail in its own place.
  • Put comparison criteria in the first column and give each listing its own column heading.
  • Build the template once with spare listing columns and save it as a Word template file for reuse.
  • Move or delete a whole column to change the listings without disturbing the criteria on the left.

Start with a Word table

A Word table gives you the side-by-side structure that a listing comparison needs. Each cell holds one detail, so a criterion and its values for each listing stay on the same row. Inserting a table takes one command from the Insert tab.

Choose a table with one column for criteria plus as many listing columns as you expect to compare. A grid of four or five columns keeps rows readable on a screen and on paper. Word inserts the table at the cursor, and you can drag column borders to set widths.

A comparison chart template in Word works the same way as any other table-based template. The chart is the table itself, with column headings naming each listing. You do not need a separate chart object to compare listings side by side.

Table partWhat it holdsWhy it matters
First columnComparison criteriaKeeps rows labeled so you can scan down the list
Listing columnsOne listing per columnPuts details side by side on the same row
Header rowColumn headingsNames each listing and repeats across pages
Body rowsOne criterion per rowLets you compare one attribute at a time

Choose the comparison criteria first

Comparison criteria are the attributes you judge each listing by, and they belong in the left column before you add any listing. Deciding the criteria first stops you from filling the table with details you never compare. A short list of criteria makes the template easier to read.

Write each criterion as a short label, such as price range, condition, or included features. Keep one criterion per row so a single attribute lines up across all listing columns. Group related criteria near each other so the reader can move from one to the next.

Leave room to add or remove criteria later, because your shortlist may change. Inserting a row in Word keeps the table intact and pushes the lower rows down. A template with flexible criteria rows stays useful across different sets of listings.

Set up side-by-side listing columns

Listing columns are the columns that hold each listing, and they create the side-by-side view you need. Give every listing its own column so its details sit next to the others on each row. Two lists side by side in Word become two listing columns with a shared criteria column at the left.

If you need to list side by side in Word without a table, use two columns of text through the page layout settings. That approach works for short lists but does not keep rows aligned when one side grows longer. A table keeps each criterion and its listing values on the same line.

Adding a listing column later is a matter of inserting a column in the table. Deleting a listing means removing its whole column, which leaves the criteria untouched. This makes a side-by-side comparison template in Word easy to adjust as your shortlist changes.

  • Insert a column for each listing you want to compare.
  • Type the listing name in the top cell as a column heading.
  • Keep the first column for criteria only.
  • Set a fixed width for listing columns so rows stay even.
  • Remove a whole column to drop a listing from the comparison.

Build the header row and labels

Column headings name each listing, and the header row keeps those names visible as you work down the table. Turn on the repeat header row option so the names appear again when the table crosses a page break. Clear headings stop a reader from losing track of which column belongs to which listing.

The first cell of the header row can name the comparison itself, with the criteria label beside it. Each following cell carries one listing name or a short identifier. Keep heading text short so the columns stay narrow and readable.

Bold the header row and give it a light shading to separate it from the body rows. Column headings are what make the table a comparison rather than a plain list, so treat them as a fixed part of the template. Frozen headings also help when the table is long.

Fill each row with one detail

Each body row holds one criterion, and the cells across the row hold that criterion for every listing. Filling the table this way lets you read across a row to compare one attribute at a time. The reader can also read down a column to see everything about one listing.

Keep the wording in each cell short and parallel, so values are easy to compare. If one listing leaves a detail unknown, write a dash or a short note rather than leaving the cell blank. A blank cell can look like a mistake when someone reads the comparison later.

Use consistent units and phrasing across a row, because mixed formats slow down comparison. A note row at the bottom can hold context that applies to the whole table. Keep that note short so it does not crowd the listing columns.

Save the table as a reusable template

A reusable template saves you from rebuilding the table for each new set of listings. Save the finished table as a Word template file so a fresh copy opens each time you start a comparison. Word treats a template as a starting point, and your edits go into a new document.

Name the template for its purpose, such as listing comparison, so you can find it again. Store it where Word looks for templates so it appears when you create a new document. Keep one blank version apart from any filled document you have already started.

Update the template when your criteria change, and keep the older version available for documents you still use. A template that stays current keeps your comparisons consistent. That consistency is what makes a shortlist easy to understand.

Keep the layout readable on screen and paper

Page layout settings decide whether the side-by-side listing template reads well when printed. Set page orientation to landscape when the table has several listing columns. A wider page gives each listing column enough room for its text.

Use a readable font size and consistent cell padding so rows do not look cramped. If the table runs past one page, let the header row repeat and keep each row from splitting across pages. Keeping a row on one page makes the lines across it easier to follow.

Check the table at the width you will actually use, whether on screen or on paper. Adjust column widths so listing values do not wrap into tall, narrow cells. A layout that holds its shape keeps the comparison clear for anyone who reads it.

Handle larger and uneven listings

Listings with different amounts of detail can stretch a comparison table beyond a single page. Break the table into groups of rows when the criterion list grows long, using a repeated header for each group. Grouping keeps each section readable without losing the side-by-side view.

Very long values can make one listing column much taller than the rest. Move long descriptive text into a note beneath the table and keep the cell to a short label. Short cells keep the rows even and the comparison easy to scan.

When you compare more listings than fit in a readable table, split the shortlist across two documents or two tables. Each table should hold the same criteria, so the reader can compare across tables. Consistency between tables matters more than fitting every listing into one page.

Listing comparison questions in Word

How do I make a comparison table in Word?

You make a comparison table in Word by inserting a table with one column for criteria and one column per listing. Type the criteria down the first column and the listing names across the header row. Fill each row with the value for every listing so the details line up side by side.

How do I put two lists side by side in Word?

You put two lists side by side in Word by placing them in two columns of a table, with a shared first column if the lists need labels. Page layout columns can also sit text side by side, but they do not keep rows aligned. A table is the safer choice when each list must line up row by row.

What should a side-by-side comparison template in Word contain?

A side-by-side comparison template in Word contains a header row naming each listing, a first column of comparison criteria, and body cells holding one value per listing. It also repeats the header row across pages and keeps column widths even. Save it as a template file so each new comparison starts from the same structure.

How do I add or remove a listing in the template?

You add a listing in the template by inserting a new column and typing its name in the header row. You remove a listing by deleting its whole column, which leaves the criteria column unchanged. Working in whole columns keeps the remaining listings aligned with their criteria.

Can I reuse the comparison table for other listings?

You can reuse the comparison table by saving it as a Word template and opening a new document from it each time. Keep the criteria rows and column headings and replace the cell values for the new listings. A stored template avoids rebuilding the same table for every shortlist.

How do I keep a long comparison table readable across pages?

You keep a long comparison table readable by turning on the repeat header row option so listing names appear on every page. Prevent rows from splitting across pages and keep column widths fixed. Grouping criteria into labeled sets also helps a reader follow the comparison.

Read next

Latest articles