Cargo area dimensions: Ford Explorer

See how to measure Ford Explorer cargo area dimensions yourself: length, width, height, liters of volume and load floor, with seats folded or upright.

3 min read7 viewsCargo area dimensions: Ford Explorer
— · 0 votes
Contents
  1. What length and width mean
  2. Why cargo height matters
  3. Turning measurements into volume
  4. Questions about Ford Explorer cargo measurements
  5. Do cargo space dimensions change when the rear seats are folded?
  6. How do I measure cargo area length and width myself?
  7. Where should I measure cargo height?
  8. How is cargo volume in liters worked out from dimensions?

Cargo area dimensions for the Ford Explorer change with the rear seat configuration, so the figures you need are length, width, height and the resulting liters of volume. This page explains how each measurement is taken and how to record your own numbers for a listing you are comparing.

What length and width mean

Cargo area length and width describe the flat space available on the load floor behind the rear seats. Length runs from the tailgate opening to the back of the rear seat, and width is measured across the narrowest point between the wheel arches. Record both figures with the seats in the position you plan to use, because folded seats free up more floor. A tape measure laid flat along the load floor gives a usable number for a side-by-side comparison.

Why cargo height matters

Cargo height is the vertical distance from the load floor to the ceiling or the top of the tailgate opening. The lower of those two points limits how tall an object can be before it must lie down. Measure height at the center of the cargo area, then check the opening itself, since the lip can be lower than the roof. Write the smaller figure down so a tall box is not assumed to fit upright.

Turning measurements into volume

Liters of cargo volume come from multiplying length, width and height, then converting the result to liters. A simple box calculation overstates real space because wheel arches and seatbacks cut into the corners. Compare published volume figures only when they are taken with the same rear seat configuration. Note the seat position next to any liter figure so two listings stay comparable.

Questions about Ford Explorer cargo measurements

Do cargo space dimensions change when the rear seats are folded?

Yes, seats folded cargo space is longer and taller than the space behind an upright rear seat. Folding the rear seat removes the seatback as the forward limit and opens floor area toward the front of the vehicle. Measure the cargo area in both positions if you carry long items sometimes and passengers other times. The width between the wheel arches stays the same either way.

How do I measure cargo area length and width myself?

Cargo area length and width are measured with a tape laid flat on the load floor. Run the tape from the tailgate opening to the rear seatback for length and across the wheel arches for width. Take each reading twice and note where the tape sat, so the figure can be repeated later. Keep the notes with the listing details you are comparing.

Where should I measure cargo height?

Cargo height should be measured at the center of the load floor, straight up to the roof or the tailgate opening. The tailgate opening is often the lower limit, so measure that point as well. Use the smaller of the two figures when you judge whether a tall item fits. Height changes little with the seats folded, but the usable floor does.

How is cargo volume in liters worked out from dimensions?

Liters of cargo volume are worked out by multiplying measured length, width and height and converting the cubic result to liters. That box sum ignores wheel arches and sloped seatbacks, so treat it as an upper figure. Published volume figures are only comparable when the rear seat configuration matches. Always state which seat position a volume figure refers to.

Read next

Latest articles