# Car parking space dimensions and how to measure a parking space

Learn what space a parking space needs, how to measure a car park bay with a tape measure, and what small space parking measurements should include for your car.

Car parking space dimensions describe the width and length of a parking bay, plus the clearance and manoeuvring space a vehicle needs to enter and leave it. This page explains how much space is needed for a parking space, how to measure a parking space with a tape measure, and how to check a small space against your own vehicle footprint before you commit. 

## Width, length and clearance in a bay 

Parking space dimensions combine a bay width, a bay length and the clearance around the vehicle. Bay width and length are the flat rectangle the car sits in, while clearance is the room between the car and walls, pillars or neighboring vehicles. Manoeuvring space is the extra area in front of or behind the bay that lets a driver turn into it. A standard parking bay size varies with the vehicle type and the local design rule, so the figure you need depends on the car and the site. 

## How to measure a parking space 

Measuring a parking space starts with stretching a tape measure across the bay at the floor, from one side marking to the other. A second measurement runs from the back of the bay to the open edge, and a third records the free area in front of the bay for manoeuvring. Using a good measuring tape and writing each figure down prevents mixing up width and length. Check the measurement of a car parking space at the narrowest point, because pillars and curbs reduce the usable rectangle. 

## Matching a small bay to your vehicle 

Small space parking measurements only mean something when you set them against the vehicle footprint. Vehicle footprint is the rectangle a car covers on the ground, from the outer edge of the tires to the outer edge of the body. Measuring [vehicle dimensions for parking](/articles/cover-check-vehicle-dimensions-and-parking-fit/) means recording the body width including mirrors folded or open, the body length, and the height for low ceilings. A bay that fits the footprint can still be tight if the doors cannot open or the turning room is missing. 

## Questions about parking space measurement 

### How much space is needed for a parking space? 

The space needed for a parking space depends on the vehicle and on the room to open doors and turn in. A parking bay needs enough width for the car plus door clearance on each side, and enough length for the body plus a margin at both ends. The manoeuvring area in front of the bay also counts, because a car must swing into the space. Add the site rule for the vehicle class to those figures to set the final bay size. 

### How do I measure a car park space correctly? 

Measure a car park space along the floor at the narrowest point, not at eye level or along a wall. Record the width between the bay markings, the length from the back stop to the open edge, and the free manoeuvring area in front. Note any pillar, curb or low ceiling that reduces the usable clearance. Repeat each figure twice with a tape measure to catch a slipped end. 

### What is included in the measurement of a car parking space? 

The measurement of a car parking space includes the bay width, the bay length and the clearance around the vehicle. Parking bay measurement also covers the height under any overhead structure and the turning room at the entrance. Bay markings show the intended rectangle, but the usable space can be smaller where a wall or column intrudes. Measure the physical limits rather than trusting the painted lines alone. 

### How do small space parking measurements affect my car? 

Small space parking measurements decide whether you can open the doors and step out after parking. Compare the bay width with the vehicle footprint plus the door swing you need on each side. Check the bay length against the body length so the car does not block the aisle. If the figures leave no margin, the space suits a smaller vehicle or none at all.
